Peppies-Site Forums

Fun Games and General Chat.

:dj: when radio is on air you can tune in by clicking on the Peppies-Jukebox link on the top of the page (members only) and by leaving it open you can browse the site content and join in with stuff all at the same time or if you join us you can join us in the irc channel to see whats being played, make requests and join in with us there too. :dj: ADVERTS DISAPPEAR ON JOINING OUR SITE ITS FREE TO SIGN UP AND REGISTER SO DO YOURSELF A FAVOUR AND JOIN US RIGHT NOW!! HELP US TO BUILD A NICE LITTLE COMMUNITY WHERE FUN NEVER STOPS............

    12 Step Softmod with Larger Harddrive

    Share
    avatar
    Peppies™
    Site Owner
    Site Owner

    Posts : 442
    Join date : 2010-06-23
    Age : 56
    Location : Newcastle Upon Tyne

    12 Step Softmod with Larger Harddrive

    Post  Peppies™ on 17th January 2011, 16:16


    A Tutorial on softmoding an unmodded xbox with an upgraded hard drive, using an already modded xbox.
    Tools Needed
    Hardware
    - Hex Screwdriver Set
    - Computer
    - A modded xbox
    - A retail (unmodded) xbox.

    Software
    - Softmod w/ dash
    (softmod auto installer)
    - Ftp software (flashfxp)
    - 007, Splinter Cell, Mechassult hack
    (softmod auto installer)
    - Original game of which ever hack you are going to use (007, Splinter Cell etc)
    - Memory Card
    - Xbox-Hq Auto Installer Deluxe Boot Disk.
    - Config magic (found on AIDeluxe)

    Let's Get Started
    1. Take the modded Xbox and transfer the (007, Splinter Cell, Mechassult, hack) and transfer it to your memory card.

    2. Take the memory card and plug it into a controller on the unmodded xbox and transfer the hacks on the card to the xbox useing the memory manager screen in the xbox dash.

    3. Boot the original (007 - Splinter Cell - Mechassult) (You should try to find an older original, it is said that some of the Platnum hits and newer versions of these games may not work) in the unmodded xbox and open the save called Linux, it should then load the evolutionx screen.

    4. Find a menu that says backup and click on it this will backup your eeprom to the hard drive.

    5. Ftp into the box using your ftp software, you will usually find the xbox IP under the settings menu or under network settings in the evolutionx dash and the username is usually "xbox" as well as the password without the quotes.

    6. Once you ftp into the xbox, go to the C: drive and find the backup folder and copy it to you computer.

    7. Open the Config magic folder and delete the contense in the data folder and transfer the contense of the backup folder to the data folder.

    8. Transfer the Config magic folder to the modded xbox and restart, once rebooted open config magic and update your modded xbox hard drive’s eeprom from the bin file. (This step may seem unecessary but if you don’t update the already modded hard drive once you complete the new drive and put your old drive back it won't work).

    9. Now take the new large drive that you will be putting in the unmodded xbox, into the modded box with the chip and boot with the HQ Auto Installer Deluxe Boot Disk in the dvd drive chose the option to format and install a new large hardrive, once finished ftp the Config magic folder with the same eeprom files into the new large harddrive.

    10. Reboot the xbox and open config magic unlock the hardrive and update the new hardrive eeprom with the bin file save then lock the hardrive.

    11. Reboot, ftp into the harddrive delete the contents of the C: drive and replace them with the softmodded files.

    12. Turn off and remove the new large hardrive and remove the old original hardrive in the unmodded box and replace it with the new large harddrive and put your old modded harddrive back into the modded xbox.

    You now have two modded Xbox's one with a chip and one without.


    _________________
    [You must be registered and logged in to see this image.]

    Peppies [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.]

      Current date/time is 24th September 2017, 11:24