Peppies-Site Forums

Fun Games and General Chat.

:dj: when radio is on air you can tune in by clicking on the Peppies-Jukebox link on the top of the page (members only) and by leaving it open you can browse the site content and join in with stuff all at the same time or if you join us you can join us in the irc channel to see whats being played, make requests and join in with us there too. :dj: ADVERTS DISAPPEAR ON JOINING OUR SITE ITS FREE TO SIGN UP AND REGISTER SO DO YOURSELF A FAVOUR AND JOIN US RIGHT NOW!! HELP US TO BUILD A NICE LITTLE COMMUNITY WHERE FUN NEVER STOPS............

    A Beginner's Guide to AT90USB162

    Share
    avatar
    Peppies™
    Site Owner
    Site Owner

    Posts : 442
    Join date : 2010-06-23
    Age : 55
    Location : Newcastle Upon Tyne

    A Beginner's Guide to AT90USB162

    Post  Peppies™ on 18th January 2011, 13:56

    So you have a AT90USB162 but no real clue how to use it? That's me, a week prior to writing this.

    Step one, Flashing it with a Hex
    First, you're going to want ATMEL Flip. Install the appropriate version for your PC. I used the top one and you probably will too.

    Next, hook up your AT90USB162 to your PC. Reset it to original settings. On my chip this is done by holding down the HWD button while hitting reset. After you hit the reset button, release the HWD button and you're back to basic settings.

    After you've done this, your computer will have new hardware. Select a location to install drivers. For me, the drivers were at: C:\Program Files\Atmel\Flip 3.4.2\usb
    If you need this tutorial, they probably will be for you too.

    Your PC should recognize your AT90USB162 now. So start up Flip. Select the the first icon on the left hand side(the mouse over reads: Select a Target Device) and select your AT90USB162.

    Next, select the icon immediately next to it and open the connection.

    Then, click on the red arrow pointing to the book page (mouse over reads: Load a Hex File). Select a hex file. At this time of writing, you should be using Hermes V4 for AT90USB162

    After you've selected it, hit the run button at the bottom left. All the lights on the left hand sign should go green. Then, click on 'start application'. Step 1 complete.

    Step Two, Package Files

    Get a regular USB Flash Drive / Pen Drive / Jump Drive. Whatever your favourite term is. Doesn't have to be big.

    Plug it in, go to my computer, right click, format to FAT32. You'll lose all your data. Then, dump your package files onto it.

    If you're reading this, you're probably going to be running all your legal backups. I useopen manager.

    Also on your USB drive you should put [url = [You must be registered and logged in to see this link.] Awesome File Manager[/url].

    Safely Remove Hardware and your USB drive has what it needs.

    Step Three, using your AT90USB162

    Insert a disk into your PS3, then shut it off, remove the power cable. Plug in your AT90USB162 and then the power cable. Turn on your PS3 and within 200ms after hitting the power button, hit the eject disk. The PS3 will take a while to load but when it finally does, you'll have two new options on your Game submenu. Namely "Install Package Files" and "PS3_Apps/Games".

    Plug in your USB Drive. Install Open Manager and Comgenie's Awesome File Manager.

    Step Four, using a Backup Manager
    After you've installed Backup Manager, go down to it in the game submenu and open it. You can use it to create your backups. Make one and select it. Your PS3 will look like it's about to run the game before 'crashing' to the main menu. Open up PS3_Apps/GAMES. Your game should install and then launch. Bravo.

    Optional Step Five, broken Blu Ray

    So, like me, you have a broken Blu Ray drive and found it more sensible to pay $40 for an AT90USB162 than $150 for SOny to repair it. Well, after you've gotten your Blu Ray backup on your PC via whatever means you use. The backup will be a folder with the data in it. Not an iso, not any other format. Just the folder with the files. Install the PC version of Comgenie's Awesome File Manager and select your backup folder. Next, put said backup folder on a USB large enough to hold it. You can make seperate trips but it must be able to hold 4+gigs.

    Put the USB driver in your PS3 and open up the PS3 version of Comgenie's Awesome File Manager. Transfer the files from your USB to Game/LAUN12345/GAMEZ/. Comgenie will piece the 4 gig parts back together. Doubleback to option 4.


    _________________
    [You must be registered and logged in to see this image.]

    Peppies ™ [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.]

      Current date/time is 24th July 2017, 03:42